Wednesday, January 13, 2010

Day 13 - January 13, 2010

Stickin’ with the Pups!

Supplies used:

Cricut® Expression Personal Electronic Cutter
Paper Pups® Cartridge
Cricut® Cuttables White Magnet Material
Black vinyl
Tan vinyl
12” x 12” cutting mat
Cricut® Deep Cut Housing and Blade


Install the Cricut® Deep Cut Housing and Blade in the Cricut®. Take a sheet of Cricut ® Cuttables White Magnet Material, place it on to the cutting mat, and load the mat into the Cricut®. Set the following settings on the Cricut®: Speed 3, Pressure 5, Blade Depth 6, and Multi-cut 4. Using Paper Pups ® cartridge select “Scotty”. This will be cut out of magnet material first. Set the size to 4 inches and use the “real dial” setting. First to cut is “Scotty – Blackout” followed by “Scotty”. We will overlay vinyl to create the dogs. Using black vinyl, setting the blade at a depth of 2 and the pressure to medium, cut out “Scotty – Solid”, and “Scotty”. To cut the outline of the image, use the tan vinyl to cut “Scotty”. Assemble as shown.

1 comment: